2013 Roadtrek 210 Drawer Latch & Cabinet Latch

[Diver007]

Has anybody ever found a source for Roadtrek drawer and cabinet latches? I found some that are close yet they won't work on drawers. Roadtrek is no help, and second sources don't have them. I'd appreciate any help.

[Doneworking]

This looks like your pic and the ones in my RT.

https://www.amazon.com/RV-Designer-H...and=9011106775

[Diver007]

Originally Posted by Doneworking

This looks like your pic and the ones in my RT.

https://www.amazon.com/RV-Designer-H...and=9011106775

These are longer than the Roadtrek Part and won't fit in the drawer applications.

[Roadtreker357]

Originally Posted by Diver007

These are longer than the Roadtrek Part and won't fit in the drawer applications.

If you mean the latch handle is too long to fit in the recessed wood, cut off the ends to make shorter.

[Chams]

I have a 2010 170V RT and the one from Amazon was smaller than the original on the bathroom. Bought 2 and couldn't use them.

[Ron J. Moore]

I have bought a couple from PPLMotorhomes…..and they are small, just like those on Amazon. Considering using 40lb pull Magnets and get rid of those plastic things. BTW, if your removing the bottom drawer, did you have to remove the wood casing for the third seat?

[Lanex005]

I took mine off door and found small spring inside. Went to hardware store bought spring same width and structure. It was too long. Cut it a few curls longer and put it in latch. Works perfectly. Cost under $2!
Good luck. Btw found spring on underside!
Lanex005