I sewed some reinforced foil to the outside of the stock window shades. Now they are opaque and they reflect radiant heat.
Made this door stop for the refrigerator door to keep it from opening all the way. If that happens, the plastic door presses against the metal hinge a
I put a longer strap on the bottom half that holds the bed in the stored position. This allows me to put a lot of stuff in that space created by not h
Here is the passenger side window covering in place. The driver's and windshield shades are the same. I'm happy with the two side ones, but the windsh
I sewed some reinforced foil to the outside of the stock window shades. Now they are opaque and they reflect radiant heat.
Upper refrigerator compartment cover is smaller than the hole it's supposed to be in and in danger of falling out. A couple of pieces of 3M double sid
This is the baffle installed. Flame stays lit at highway speeds. No need to run on 12v.
Flame for refrigerator is in trailing edge of compartment and gets blown out while traveling. I made a baffle out of a piece of step flashing. Cut fro
eric1514

I sewed some reinforced foil to the outside of the stock window shades. Now they are opaque and they reflect radiant heat.

There are no comments to display.

Photo information

Category
Class B Forums Albums
Album
Mods
Added by
eric1514
Date added
View count
52
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top