2004 Roadtrek 190P Crank Out Window Parts

[SteveD]

My driver's side rear crank-out window became loose. Luckily, I was able to spot it before the glass fell off. The bracket on the left side, where the glass attaches, looks missing. Does anyone know where I can find replacement parts? I may have to rig up something if I can't find any parts.

Thanks for the help.

[michaelingp]

Lots of posts on this issue. Search for "Laurence" (the real spelling), and "Lawrence" (how a lot of people spell it). Unfortunately, the search won't accept "CRL", which is how a lot of people reference the company in their posts. The full name of the company that made those windows is "C. R. Laurence", although they themselves use "CRL". In my experience, their customer service is outstanding, even though they typically don't deal with retail customers. Of course my experience is 11 years ago.

[SteveD]

Thank you so much for the information. I sent a request to CRL and will await their response. Have a wonderful weekend!!

[ConradS]

You didn't make clear what part you are talking about. Is it the channel along the hinge that the glass is glued into or the small channel glued to the glass that the control arm roller rides in? In either case, check vanwindowsdirect.com. I don't believe that CR Laurence deals directly with individuals

[ChicagoTom]

I have a PleasureWay, so maybe mine are different, but here is where I got my parts from. The little plastic guide roller was off, so I had to replace the entire arm and crank https://www.pellandent.com/RV-Torque-Window-Parts

[SteveD]

My apologies for leaving out the information. The one in question is the left hinge that has the roller. Apparently, the piece that holds the bar that is attached to the window. It must have fallen off somewhere.

[ChicagoTom]

Originally Posted by SteveD

My apologies for leaving out the information. The one in question is the left hinge that has the roller. Apparently, the piece that holds the bar that is attached to the window. It must have fallen off somewhere.

Steve, Did you read my reply? You need to order the entire part. I believe there are two sizes, check the link I provided and measure. Unfortunately the part rarely breaks, but the cheap plastic guide roller does.